Chassis Dyno testcell

Superflow 880E Series AWD Chassis Dyno

In short
Our 42-inch roll four-wheel-drive AutoDyn chassis dyno is a high-capacity chassis dynamometer, it can measure up to 1500hp with a top speed of 320km/h (200miles/h). It features 42-inch (107 cm) diameter rolls for minimum tire deflection and maximum contact patch size. Torque is measured with a temperature-compensating load cell for precise torque and power readings. Around all this our test cell is well ventilated with 90.000m3 per minute, and features one of the highest car cooling capacities around the world with 50.000m3 pressurized air powered by 60Kw for two engines.

Extended research
This 42-inch roll AutoDyn chassis dyno can run a variety of built-in vehicle tests that we use when developing products, including single-gear or all-gear tests at wide open throttle. Controlled acceleration, controlled deceleration, step, steady-state, aero load, and drive cycle tests can be easily run with the included eddy current power absorber module. The steady-state and drive cycle tests can be performed at full or partial throttle settings.

The SuperFlow Sensor box monitors and measures the data from the AutoDyn chassis dynamometer. Ours is added with a variety of accessories, including multiple temperature measurement, multiple pressure measurement, and air/fuel monitoring to support our intensive research.

Spec list
Features:

• Air-actuated roll lock
• In house engineered air activated drive on assist for low cars
• dual eddy current power absorber(s)
• all-wheel-drive
• Bi-directional test capability
• Stand-mounted data acquisition and control system with four liquid
• crystal displays
• Two lambda sensor inputs (sensors not included)
• expansion bays for optional thermocouple, pressure
• Handheld system control and display unit
• Real-time weather station (air temp, barometric pressure and humidity)
• Cooling capacity of 60Kw/ 50.000 m3 @ …. And ventilating 90.000 m3 fresh air p/min.

Speed Rating up to 200 Mph (320 km/h) - Maximum Wheel Power up to 1,500 hp (1118 kW) - Control Accuracy  ± 0.1 mph (0,2 km/h)

Dynoday

If you want to arrange a dynoday, contact us for the information.